PRODUCT 產品詳情

內墻系列 lnterior Wall Series

輔材系列 Auxiliary material series

工業涂料 lndustrial coating

防水漆 Waterproof paint

地坪漆 Floor paint

首頁

+

瑪曼奴 Marmanno originates

產品說明 ? 瑪曼奴源于意大利，是一種具有仿拋光大理石效果的天然石灰基材料，細膩柔滑，光澤透亮，透氣性能強，既可以單獨作拋光使用，也可以擦色做舊。常被設計師運用在中式和現代的裝飾風格中，展現出大方素雅的美感，營造出舒適、美觀的環境空間。 Product Description Marmanno originates from Italy. It is a natural lime-based material with the effect of imitating polished marble. It is delicate and smooth, with a bright luster and strong air permeability. It can be used for polishing alone or for wiping color to create an aged effect. It is often used by designers in Chinese-style and modern decorative styles, showing a generous and elegant aesthetic feeling and creating a comfortable and beautiful environmental space. ?

關鍵詞：

所屬分類：

產品中心

藝術漆 Art paint

瑪曼奴

咨詢熱線：

0591-22700988

推薦產品

在線咨詢

瑪曼奴 Marmanno originates

圖文詳情

產品參數

- 物理形態：無機干粉。

- 涂布率：0.8 - 1kg/㎡。

- 加水量：0.4 - 0.6kg/kg。

- 密度：1kg/L（自然狀態下）。

- 環保指標：VOC未檢出。

施工流程

- 施工準備：確保施工墻面干凈、平整、干燥，無空鼓、裂縫等問題，陰陽角垂直方正，基地含水率小于8%，室內溫度5攝氏度以上。準備好短毛滾筒、進口批刀、調色刀等施工工具。

- 施工步驟：首先均勻滾涂滲透底漆1遍。接著均勻滾涂磨砂底2遍。然后均勻批涂瑪曼奴第一遍，施工批涂第一層時，盡量批涂平整。在第一遍八成干后，用不規則手法批涂瑪曼奴第二遍，第二層瑪曼奴把握好干燥速度及時收光，適當用批刀收平再拋光。最后根據客戶要求情況來建議上防塵面漆。

Product Parameters

- Physical Form: Inorganic dry powder.

- Spreading Rate: 0.8 - 1kg/㎡.

- Water Addition: 0.4 - 0.6kg/kg.

- Density: 1kg/L (in the natural state).

- Environmental Protection Index: VOC not detected.

Construction Process

- Construction Preparation: Ensure that the construction wall surface is clean, flat and dry, without problems such as hollowing and cracks. The inside and outside corners are vertical and square. The moisture content of the base is less than 8%, and the indoor temperature is above 5 degrees Celsius. Prepare construction tools such as short-haired rollers, imported putty knives and color mixing knives.

- Construction Steps: First, evenly roll on the penetrating primer once. Then, evenly roll on the frosted base twice. Next, evenly apply the first layer of Marmanno. When applying the first layer during construction, try to make it as flat as possible. After the first layer is 80% dry, apply the second layer of Marmanno with an irregular method. For the second layer of Marmanno, control the drying speed well and polish it in time. Appropriately level it with a putty knife and then polish it. Finally, suggest applying the dust-proof topcoat according to the customer's requirements.